9.5.2.1 Connecting shore power

Connect the shore power in the correct order to minimise the risk of electric shock and fire.
The shore power system is equipped with an RCD that functions as the system main switch.
  1. Connect the shore power cable to the boat’s inlet first.
  2. Connect power cable to the shore power source.
    If the reverse polarity indicator activates, turn off the RCD switch immediately and correct the polarity fault before activating the boat's electrical system.

To disconnect shore power, unplug the power cable from the shore power source first.

Close the cover of the shore power inlet tightly when the power cable is disconnected.

Parent topic: Shore power