13.1.2 Before launching

Perform these actions before launching the boat:

  • If you have stored the boat under a tarpaulin, remove it in good time before launching.

  • Wash the hull and bottom with a suitable detergent and a soft brush.

  • Paint the bottom with antifouling paint if the boat is to be used in salt water.

  • Put the batteries back and check the electrolyte levels in the cells. Check the condition and charge levels of the batteries.

  • Check all cables, clamps, engine mountings and other fastenings.

  • Check the steering and instrumentation before launching.

  • Make sure that all drainage devices are tight and in order. Check that there is no frost damage.

  • Check the condition of anodes and replace them if necessary.

To avoid corrosion, only paint the aluminium hull with antifouling paints that are completely free of copper compounds. 

Consult your local dealer for recommendations of suitable paints.