8.1 Starting the engine
The ignition is controlled either by a button or key, depending on the boat model or accessories.
Start the engine by doing the following:
-
Switch on the power using the main power switch.
-
Lower the engine to the driving position by pressing the Power Trim button on the gear/ throttle handle.
-
Check that the gear is in the neutral position and that the emergency switch is attached to the bottom of the remote control.
-
Switch on the ignition using the power button/key on the steering console and wait a few seconds for the warning lights to light up.
-
Start the engine by pressing the start button/turning the key until the engine starts. The engine should start within 1-2 seconds. Do not try to start the engine for more than 10 seconds at a time.
-
Let the engine idle for a few minutes before setting off.
Read the engine manual for more detailed information about the engine.