7.2 Refueling and maintenance
The fuel inlet is integrated into the fuel tank, see Fuel system components.
Risk of fire!
Stop the engine and extinguish any naked flames and cigarettes before refueling.
Do not operate any electrical equipment when refueling.
Make sure that no fuel spills onto the tank or into the bilge. Clean up any fuel spills immediately.
Before refueling, remove the tank from the boat by disconnecting it from the fuel line.
Place the tank back on the boat horizontally, so that the fuel line can draw from it.
Before starting the engine, send fuel into the fuel line using a primer pump.
For maintenance:
Check the fuel lines annually for wear and tear.
Check the fuel filter regularly to ensure that there is no water in the moisture trap, which is located under the filter.
Change the fuel filter 1-2 times a year depending on the engine hours and quality of fuel.
Refer to a separate engine manual for detailed instructions on refueling and maintenance.