8.1 Starting motor

Before starting the motor, ensure that the shore power cable is disconnected from the boat.

Never switch on the drive system if the cables or components have signs of mechanical damage.
  1. Switch on the drive system main switch.
  2. Check that the throttle handle of the electronic remote control is in the neutral position.
  3. Switch on the motor by pressing the power button on the remote control for one (1) second.
    The system starts up after approximately 15 seconds.
  4. Attach the magnetic clip of the emergency cut-off switch to the bottom of the remote control.

Lower the motor into the driving position by pressing the motor tilt switch on the helm station.

For more information on starting the motor, see a separate motor manufacturer's manual.

Parent topic: Motor